diy-sim-racing-ffb-pedal

24 articles 489 View on GitHub ↗
24 articles
How to Migrate Firmware Between Different PCB Versions in the DIY Sim Racing FFB Pedal

Learn how to migrate firmware between different PCB versions for your DIY Sim Racing FFB Pedal. Easily update your hardware using download mode and PlatformIO.

migration-guide
Feb 27, 2026
PedalGeometry Kinematic Calculations and Lever-Arm Force Analysis in DIY Sim-Racing FFB Pedals

Explore PedalGeometry kinematic calculations for DIY Sim-Racing FFB Pedals. Learn how to model pedal linkage, calculate angles, and analyze lever arm forces for optimal performance.

deep-dive
Feb 27, 2026
How to Troubleshoot ISV57 Servo Drive Modbus Communication in DIY Sim-Racing FFB Pedals

Troubleshoot ISV57 servo drive Modbus communication for DIY sim-racing pedals. Check pin mapping, UART settings, and CRC calculations for reliable FFB control.

how-to-guide
Feb 27, 2026
How to Create Custom Force Profiles and Set Spring/Damper Settings on the DIY Sim Racing FFB Pedal

Learn to create custom force profiles and set spring damper settings for your DIY Sim Racing FFB Pedal by editing JSON arrays and configuring the PID controller. Optimize your setup today.

how-to-guide
Feb 27, 2026
DIY Sim-Racing FFB Pedal Power Supply Requirements: 36V vs 48V Servo Voltage Selection

Choose the right servo voltage for your DIY sim-racing FFB pedals. Learn about 36V vs 48V power supply requirements and easily upgrade your setup.

deep-dive
Feb 27, 2026
Optimal Task Priority and Timing Configurations for Deterministic Performance in ESP32 Sim Racing Pedals

Achieve sub-millisecond deterministic latency for ESP32 sim racing pedals. Optimize task priority and timing with round-robin scheduling and RUN_IN_CACHE for ultimate control.

best-practices
Feb 27, 2026
How to Configure Analog Output Using MCP4725 DAC in DIY Sim-Racing FFB Pedal

Configure analog output with MCP4725 DAC for your sim-racing FFB pedal. Learn how to wire and set voltage using simple code for DIY projects.

how-to-guide
Feb 27, 2026
How to Implement Emergency Stop and Safety Features in a DIY Sim-Racing FFB Pedal

Learn to implement emergency stop and safety features in your DIY sim-racing FFB pedal. Discover a robust hardware-software architecture for guaranteed zero torque during faults.

how-to-guide
Feb 27, 2026
How the Multiple Pedal Synchronization and Assignment System Works in DIY Sim-Racing FFB Pedals

Explore the DIY Sim-Racing FFB Pedal system's multiple pedal synchronization and assignment. Learn how ESP-NOW, ESP-32 firmware, and a bridge board enable seamless wireless control for your sim rig.

how-to-guide
Feb 27, 2026
How to Troubleshoot Pedal Oscillation and Control Loop Stability in DIY Sim-Racing FFB Pedals

Troubleshoot pedal oscillation and control loop stability in DIY sim-racing FFB pedals. Learn to tune PID gains, disable smoothing, and enable oscillation detection for smoother control. Get started today.

troubleshooting
Feb 27, 2026
DIY Sim-Racing FFB Pedal Calibration Procedures and Force Range Configuration Guide

Master DIY Sim-Racing FFB pedal calibration with SimHub. Learn to auto-zero pedals and configure preload and max force for optimal control and adjustable force ranges up to 200kg.

how-to-guide
Feb 27, 2026
Signal Filtering Algorithms in the DIY Sim-Racing FFB Pedal: Kalman, Moving Average, and Digital FIR Filters

Explore Kalman, moving average, and digital FIR filters for your DIY Sim-Racing FFB Pedal. Improve sensor data processing for a smoother force-feedback experience.

deep-dive
Feb 27, 2026

Have a question about this repo?

These articles cover the highlights, but your codebase questions are specific. Give your agent direct access to the source. Share this with your agent to get started:

Share the following with your agent to get started:
curl -s "https://instagit.com/install.md"
Works with
Claude Codex Cursor VS Code OpenClaw Any MCP Client

Maintain an open-source project? Get it listed too →