Troubleshooting Invalid Commit Abbreviation Errors in SwarmForge Handoffs: A Complete Fix Guide

SwarmForge requires a strict 10-character hexadecimal commit abbreviation in handoff headers, validating format in commit-check and uniqueness in canonical-commit before any file reaches the outbox.

SwarmForge enforces rigid commit abbreviation rules to ensure every handoff references an unambiguous, reachable Git commit. When validation fails, you receive explicit errors explaining whether the problem is format, uniqueness, or object type. Understanding the dual validation pipeline in swarm_handoff.bb lets you diagnose and fix these errors quickly.

How SwarmForge Validates Commit Abbreviations

SwarmForge runs two sequential validation steps before queuing any handoff. Both are implemented in swarmforge/scripts/swarm_handoff.bb:

Step 1: Format Validation (commit-check)

The commit-check function validates that the commit header contains exactly 10 hexadecimal characters.

• Located at lines 1110–1116 in swarm_handoff.bb
• Rejects abbreviations with wrong length or non-hex characters
• Forwards valid abbreviations to the next step

If this check fails, you see:

Header 'commit' must be exactly 10 hexadecimal characters; got 'abc123'.

Step 2: Canonical Resolution (canonical-commit)

The canonical-commit function resolves the abbreviation to a unique Git object and rewrites it in canonical short form.

• Located at lines 666–682 in swarm_handoff.bb
• Runs git rev-parse --disambiguate=<abbr> to verify exactly one object matches
• Confirms the object is a commit (not a tag, tree, or blob)
• Rewrites the SHA to --short=10 format

Failure modes produce messages like:

Header 'commit' must resolve to exactly one Git object; '<abbr>' matched 0.

or

Header 'commit' must resolve to a commit.

The handoff protocol documentation in README.md (lines 80–86) explicitly states this 10-character requirement for all outbound drafts.

Root Causes of Invalid Commit Abbreviation Errors

Four distinct validation failures trigger these errors:

Failure	Cause	Example
Wrong length	Fewer or more than 10 characters	a1b2c3 (6 chars) or a1b2c3d4e5f6 (12 chars)
Non-hex characters	Characters outside [0-9a-fA-F]	a1b2c3d4eZ
Ambiguous abbreviation	Matches multiple Git objects	Same prefix matches both tag and commit
Non-commit object	Resolves to tree, blob, or tag	Abbreviation points to annotated tag

These checks execute during header validation, before any handoff file writes to the outbox. This guarantees only well-formed handoffs proceed.

Where Validation Fits in the Handoff Flow

Understanding the execution order helps trace errors:

1. parse-draft — reads the handoff draft file and builds a header map
2. prepare-headers — calls fill-commit to insert current HEAD short SHA if commit field is missing
3. validate — calls commit-check then canonical-commit
4. Error aggregation — any errors collect in all-errors; non-empty list aborts with printed diagnostics

Since validation occurs pre-write, fixing the draft file resolves the error without cleaning up partial handoffs.

Common Pitches and Fixes

Symptom	Root Cause	Solution
"must be exactly 10 hexadecimal characters"	Manual short SHA wrong length	Omit commit: line to auto-populate, or use git rev-parse --short=10
"must resolve to exactly one Git object"	Ambiguous abbreviation matches multiple objects	Extend abbreviation to 12+ characters or use full SHA
"must resolve to a commit"	Points to tag or blob	Use git rev-parse <tag>^{commit} to get underlying commit
"Result commit … is not reachable from sender worktree"	Commit on different branch	Ensure git merge-base --is-ancestor <sha> HEAD returns true

Code Examples: Correct and Incorrect Drafts

Auto-Populate (Recommended)

# ✅ Correct: omit commit to let SwarmForge insert HEAD

type: git_handoff
to: reviewer
priority: 50
task: improve-validation

Manual Specification with Proper Format

# ✅ Correct: exactly 10 hex characters

type: git_handoff
to: reviewer
priority: 50
task: improve-validation
commit: 3e5a1b2c4d

# ❌ Incorrect: only 6 hex characters

type: git_handoff
to: reviewer
priority: 50
task: improve-validation
commit: a1b2c3

Bash: Generate Valid 10-Character Abbreviation

# Get full SHA, then generate proper short form

FULL=$(git rev-parse HEAD)
SHORT=$(git rev-parse --short=10 "$FULL")
echo "commit: $SHORT"

Bash: Resolve Ambiguous Abbreviation

# Extend to 12 characters for uniqueness

git rev-parse --short=12 "$FULL"

# SwarmForge truncates to 10 after verification

Bash: Verify Object Type

# Confirm abbreviation points to commit

git cat-file -t <abbreviation>

# Get commit from tag

git rev-parse <tag>^{commit}

Bash: Verify Reachability

# Ensure commit is ancestor of current branch

git merge-base --is-ancestor <sha> HEAD && echo "Reachable"

Key Source Files

File	Purpose
swarmforge/scripts/swarm_handoff.bb	Core validation logic: commit-check (lines 1110–1116), canonical-commit (lines 666–682)
swarmforge/handoff-protocol.md	Formal protocol specification including commit abbreviation rules
README.md	User-facing documentation of draft format requirements (lines 80–86)

Summary

• SwarmForge requires 10-character hexadecimal commit abbreviations enforced by dual validation in swarm_handoff.bb
• commit-check (lines 1110–1116) validates format; canonical-commit (lines 666–682) validates uniqueness and object type
• Four error causes: wrong length, non-hex characters, ambiguous abbreviation, non-commit object
• Simplest fix: omit the commit: line to auto-populate from current HEAD
• Manual fixes: use git rev-parse --short=10 for format, extend length for ambiguity, ^{commit} for tags

Frequently Asked Questions

What happens if I use a 7-character Git default short SHA?

SwarmForge rejects it. The commit-check function in swarm_handoff.bb requires exactly 10 hexadecimal characters. Git's default short SHA varies by repository; SwarmForge standardizes on 10 for consistency. Use git rev-parse --short=10 HEAD to generate the correct length.

Can I use a full 40-character SHA instead of an abbreviation?

Yes. Pass the full SHA to canonical-commit, which verifies it resolves to exactly one commit object, then rewrites it to 10-character short form. The validation logic at lines 666–682 handles any valid Git object identifier before canonicalization.

Why does my 10-character abbreviation still fail with "matched 0"?

The abbreviation likely references an object not present in your local repository or a commit from a different worktree not merged into your current branch. Run git cat-file -t <abbreviation> to verify existence, and git merge-base --is-ancestor <sha> HEAD to confirm reachability.

How do I fix an abbreviation that matches both a tag and a commit?

Extend the abbreviation until git rev-parse --disambiguate=<abbr> returns exactly one result. Usually 12 characters suffices. SwarmForge's canonical-commit will still truncate to 10 after confirming the unique object is a commit.

{
  "mcpServers": {
    "instagit": {
      "command": "npx",
      "args": ["-y", "instagit@latest"]
    }
  }
}